2017-2022 Ford F-250 Super Duty SuperCab (Extended Cab) Precut Ceramic Window Tint Kit

Your kit contains precut film for the coverage and shade you select. Check all pieces against your vehicle before application; do not trim film on the car. If you are unsure of a pattern, send us your vehicle details and a photo before ordering.

Fits: 2017-2022 Ford F-250 Super Duty SuperCab (Extended Cab) only. Pieces arrive already cut for this vehicle's glass, so there is no trimming on the car.

• Precut ceramic film pieces sized for your selected coverage
• Free U.S. shipping on all orders

Roof glass is sold separately. Complete Kit: Sides + Back Glass does not include the windshield strip (the band across the top of your windshield), sunroof, moonroof, panoramic roof, or fixed roof glass. Choose the separate Sunroof Glass Only or Panoramic Roof Glass Only option when available.

Exactly what each coverage option includes

Select only the glass you want. Film shade is chosen separately. Roof glass is never included in the Complete Kit.

• Complete Kit: Sides + Back Glass: All applicable side-door, vent, and quarter windows, plus the back glass. The windshield strip, full windshield, and roof glass are not included.
• Front Doors (2 Windows): Driver-side and passenger-side front door glass only.
• Front Windshield: Full Coverage: One full-coverage pattern for the front windshield (off-road use only).
• Back Glass Only: Rear Window: The large rear-facing back glass only. Side and door windows are not included.
• Sunroof Glass Only: The standard sunroof or moonroof glass only. Other roof and vehicle glass is not included.
• Rear Doors + Quarter Glass + Back Glass: All applicable glass behind the front doors: rear door windows, fixed quarter or side glass, and back glass. Front doors and front windshield are not included.
• Front Door Window: Driver Side: Driver-side front door glass only.
• Front Door Window: Passenger Side: Passenger-side front door glass only.
• Rear Door Window: Driver Side: Driver-side rear door glass only. Quarter glass and back glass are not included.
• Rear Door Window: Passenger Side: Passenger-side rear door glass only. Quarter glass and back glass are not included.
• Rear Doors (2 Windows): Driver-side and passenger-side rear door glass only. Quarter glass and back glass are not included.
• Back Glass Only: 3-Piece Slider: The complete three-piece sliding rear-window assembly only. Door and side glass are not included.

Coverage choices for this product

Availability and prices are shown in the selector. Choose only the glass your vehicle has.

• Complete Kit: Sides + Back Glass
• Front Doors (2 Windows)
• Front Windshield: Full Coverage (Off-Road Use Only)
• Back Glass Only: Rear Window
• Sunroof Glass Only
• Rear Doors + Quarter Glass + Back Glass
• Front Door Window: Driver Side
• Front Door Window: Passenger Side
• Rear Door Window: Driver Side
• Rear Door Window: Passenger Side
• Rear Doors (2 Windows)
• Back Glass Only: 3-Piece Slider
• Windshield Strip (Top of Windshield)

Choose from the shade options listed above: 70%, 50%, 35%, 20%, 15%, 5%. VLT means visible light transmission; lower percentages are darker. A film shade label does not establish the final light transmission through your existing glass.

Each selected coverage uses one shade for all included pieces. For different front and rear shades, add Front Doors (2 Windows) in one shade and Rear Doors + Quarter Glass + Back Glass in another. Match each selection to your glass and avoid overlapping pieces.

Window-tint requirements vary by location and glass position. Check the requirements for your vehicle before selecting a shade, including any full-windshield and windshield-strip restrictions. The buyer is responsible for choosing film permitted for the intended application. See the tint-law guide.

Precut means the outline is ready. Installation still requires careful cleaning, preparation and heat forming. Clean the glass and surrounding seals, edges and trim before applying the film. This is a DIY kit: you install it yourself.

Tools to have on hand: a film-safe squeegee with a handle, a heat gun, a spray bottle of slip solution, microfiber towels and a tuck tool (a long, thin plastic tool for tucking film behind the seals). A small hard card helps with finishing touches like small bubbles, and a long-handled squeegee reaches the parts of the windshield and back glass a normal one can't. Slip solution is water with a drop of baby soap. Distilled water is best but not required, and travel-size baby soap is often at your nearest store. Ready-made tint solution works too.

Heat forming is required on every window unless the glass is perfectly flat. Film shrinks in one direction only—vertical or horizontal on the window, depending on how the piece was cut. Confirm the shrink direction before heating. Use low heat, light pressure and patience. Overheating can melt the film; pressing an unshrunk finger flat can leave a permanent crease.

For roll-up windows: the film must tuck behind the side and bottom gaskets so it does not catch on the seal. Where the vehicle design allows, removing the door panel and removable bottom seal can make access easier for beginners. Follow vehicle-specific instructions and allow extra preparation time.

Plan your working time. These are experienced-installer baselines, not promises for a first DIY attempt. Add up the windows in your selected coverage, then allow extra time for learning, old-tint removal, preparation and cleanup. Curing is separate.

• Door window: about 45 minutes each; a front-door pair: about 90 minutes.
• Quarter window: about 30 minutes each.
• Rear glass: about 1 hour.
• Full windshield: about 2 hours.
• Small rectangular sunroof: about 30 minutes.
• Large panoramic roof, including a Tesla panoramic roof: about 3 hours.

These times describe glass types, not what is included in this kit. Only the coverage you select is supplied. Difficulty ratings are guidance; they do not guarantee installation time.

After application: trapped water can evaporate with time; larger water pockets take longer. Air bubbles do not disappear on their own. The guide explains bubbles, immediate debris removal, curing and aftercare.

Open the step-by-step installation guide · See installation-time guidance.

• UV rejected: 99%+ in every shade
• Infrared rejected: up to 87.6%, depending on shade
• Total solar energy rejected (TSER): 63.2% at 5%, 53% at 15%, 52.3% at 20%, 49.4% at 35%, 40.4% at 50% and 38.9% at 70% VLT
• Film build: 1.5 mil, 2-ply

Per Union Window Films spec sheet.

Union Ceramic IR film: Performance varies by shade, with up to 87.6% infrared rejection, 99%+ UV rejection, and 1.5 mil, 2-ply construction.

Will this kit fit my 2022 Ford F250 SuperCab?

It fits the 2017–2022 Ford F-250 Super Duty SuperCab (Extended Cab), model years 2017, 2018, 2019, 2020, 2021 and 2022. Kits are cut by year range and body style, so other Ford F-250 Super Duty body styles and years have their own kits (linked above). Not sure which one you have? Email us your vehicle details and a photo before ordering.

What does the Complete Kit include for the Ford F-250 Super Duty SuperCab?

Every side window (both front doors and both rear doors, plus any vent or quarter glass) and the back glass. The windshield strip, full windshield (off-road use only) and sunroof glass (if equipped) are sold separately. The Complete Kit is rated 4/5 for DIY difficulty (door windows 2/5 and back glass 3/5).

Which tint shade should I choose for my Ford F-250 Super Duty?

70% is the lightest shade and 5% the darkest. Heat rejection rises as the film gets darker, but even 70% is rated at 74.3% infrared rejection, so you can cut heat without going dark. Front side windows usually have stricter limits than rear glass, so check your state's tint law before you choose.

Free standard U.S. shipping. Orders are cut to order, with preparation typically taking 1–3 business days, plus 3–7 business days in transit after shipment. These are estimates, not guaranteed arrival dates. Tracking is emailed when your order ships.

Read the shipping policy. If your glass configuration needs confirmation, resolve it before the film is cut.

Every return and same-vehicle exchange is free — including return shipping. Opened, partially installed, or wasted film can be returned within 30 days of delivery for a full refund of the product price, with no restocking fees.

Exchanges: unlimited free exchanges for the same year, make, and model as your order (for example a different shade, coverage, or body-style correction on that vehicle). Request the first exchange within 30 days of delivery; each later exchange within 30 days of your last exchange. Exchanges for a different vehicle are not covered.

Start at hmu4tint.com/pages/returns: create your free account, submit the return form, and we email you a prepaid return label. Send back all film pieces (used or unused) with the original shipping tube, neatly rolled with the original packing, ends capped and taped. Returns that are forcefully stuffed into the tube or intentionally damaged cannot be accepted.

Wrong pattern for the vehicle you selected? Email hmu4tint@hmu4tint.com within 14 days of delivery with your order number and photos. If the error is ours, we replace or refund and cover shipping.

Recuts (install mistakes): HMU4TINT+ members get unlimited free same-vehicle recuts within 45 days (photo + recut form required). Free account holders get one free same-vehicle recut within 30 days of delivery (recut form required). Free recuts require a free HMU4TINT account. Recuts must be for the same vehicle make and model as the original order. Damage from trimming film on the car is not covered. See our refund policy.

Request a recut · Read the full return and refund policy.